Preparations
Single Use
Utility System
Sterile APIs
Lab/Microbial Limit Tests
Cobetter Instruments
OEM Membranes and Devices
Sintered Porous PTFE
Oxygenation
Air and Vent Filtration
Infusion Therapy
Medical Water Filtration
Surgical Smoke ULPA Filter
Semiconductors
Flat Panel Display
Electronic Chemicals
Data Storage
High Brightness Light Emitting Diode
Brewing
Bottled Water
Wine
Soft Drinks
Dairy
Distilled Spirits
Food and Ingredients
Energy and Chemical Industry
Fine Chemical Industry
Hydraulic & Lubricating System
Machinery & Equipment
Transfer Membrane
Sterility Testing
Groundwater Sampling Filter
Automobile Exhaust Detection Membrane
Car Cleanness Filter Detection Membrane
Atmosphere /Flue Gas Monitoring Membrane
Ultrafiltration Centrifugal Tube
Polypropylene Membrane
Cobetter Polypropylene (PP) membrane is constructed of pure polypropylene media, which belongs to a membrane filter material for deep filtration. Polypropylene membrane is natural hydrophobic, can withstand a variety of organic solvents, has great chemical stability and chemical compatibility. Polypropylene membrane is tough and durable, not easy to break, non-toxic, and with uniform strength. At the same time, Cobetter also offers hydrophilic polypropylene membranes. Polypropylene membrane can withstand PH values from 1 to 14 and have high compatibility with acids and bases. So, they are ideally suited for general clarification and pre-filtration of water, aqueous solutions and organic solvents. Additionally, polypropylene membrane is also commonly used for the retention and analysis of large particles. Since polypropylene membranes also have very low extractable content, this performance often provides a perfect solution for accurate analysis in chromatographic correlation applications.
Cobetter polypropylene membrane has a wide selection range of pore sizes. Polypropylene membrane is with high porosity, large amount of dirt-holding volume, and can withstand high temperature disinfection. For the different filtration requirements from different customers, Cobetter can also provide polypropylene nanofiber membranes with extremely high retention efficiency, no fiber shedding and long life time. Compared with PTFE membrane and PVDF membrane, polypropylene membrane can be safely treated by incineration without releasing harmful fluorine compounds and there is no disposable problem.
Cobetter polypropylene membrane also has wide range of medical and laboratory applications such as pre-filtration of infusion solvent, gas filtration in medical device and so on. Additionally, PP membrane is also used for pre-filtration for sample preparation, solution, solvent etc. and syringe filter in laboratory. These applications can fully display polypropylene membranes advantages of high flow rate, large amount of dirt-holding volume, and low extractable.
Cobetter Polypropylene Membrane Performance Advantages
- Pre-filtration with highly dirt-holding capacity;
- Good chemical compatibility;
- Good hydrophobic/hydrophilic properties;
- Resistant to PH1-14; Resistant to temperature of 80°C;
- Non-specific absorption function and protein absorption is very low;
- Conforms to the filter standard “Fiber free release” defined in FDA CFR 210.3(b)(6);
Polypropylene Membrane Chemical Resistance Summary.pdf
Polypropylene Membrane Applications
- Gas filtration - Ion chromatography analysis - Syringe filter - Organic solvent filtration, HPLC solvent - Remove large particulate - Pre-filtration of APIS - Pre-filtration of blood products - Pre-filtration of medium - Pre-filtration of dosing system |
|
Specification | Pore Size | Thickness | Air Flow Rate/s | Water Pressure Resistance/kPa |
PP hydrophobic membrane 0.1μm | 0.1 | 200 | 25 | 66 |
PP hydrophobic membrane 0.2μm | 0.2 | 200 | 26 | 49 |
PP hydrophobic membrane 0.45μm | 0.45 | 200 | 10 | 37 |
PP hydrophobic membrane 1μm | 1 | 210 | 3.5 | 23 |
PP hydrophobic membrane 5μm | 5 | 190 | 1 | 17 |
PP hydrophobic membrane 10μm | 10 | 150 | 0.42 | 8 |
PP hydrophobic membrane 15μm | 15 | 240 | 0.08 | 6.5 |
PP hydrophobic membrane 20μm | 20 | 220 | 0.06 | 6.5 |
PP hydrophobic membrane 30μm | 30 | 260 | N/A | 3 |
PP hydrophobic membrane 40μm | 40 | 480 | N/A | 2 |
Specification | Pore Size | Thickness | Liquid Flow Rate/s | Bubble Point/ kPa |
PP hydrophilic membrane | 0.2 | 190 | 15 | 66 |
PP hydrophilic membrane | 0.45 | 190 | 4 | 45 |
PP hydrophilic membrane | 1.0 | 170 | 14.6 | 18 |
PP hydrophilic membrane | 5.0 | 320 | 4.1 | 20 |
PP hydrophilic membrane | 10 | 170 | 2.8 | 7 |
PP hydrophilic membrane | 10 | 320 | 2.2 | 8 |
PP hydrophilic membrane | 15 | 350 | 2.1 | 6 |
PP hydrophilic membrane | 20 | 320 | 2.0 | 5 |
For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by sales@cobetterfilter.com or leave a message
High Dirt Holding Capacity Filter Cartridges | Absoguard Filter Cartridges | Unichro Syringe Filters |
![]() | ![]() | ![]() |
Hangzhou Cobetter Filtration Equipment Co.,Ltd
Tel
86-571-87704359(English)
86-571-87704270(Japanese)
sale@cobetterfilter.com
Sales
19/F, Building B, Huanyu Business Center, No.626 Kejiguan Road Binjiang District, Hangzhou 310052, China
Factory
Heshang Industry Section,Xiaoshan,Hangzhou 310053,China
COPYRIGHT 2019 Cobetter Filtration Equipment Co.,Ltd ALL RIGHTS RESERVED.
Web design:Hangzhou dingyi information technology co.,Ltd