Home | Ink Jet | Filtration for Ink Production| Meltgradient High-efficiency Depth Filter

Meltgradient High-efficiency Depth Filter

Melt-Blown PP Media

Meltgradient Series is the PP melt-blown filter with absolute filtration rate. It adopts reasonable gradient pores confirguration with deep structure. It's capable of efficiently capturing different particles. The raw material polypropylene satisfy FDA requirements, with extensive chemical compatibility.    


Features and Benefits

· Particle interception efficiency is up to 99.9%. For the structure with gradient pores, the inner layer is interwoven with high density nano-fibers


· Long service life, high flow rate. Due to the polypropylene fiber with different linear diameters and unique interwoven density control process, Meltgradient has a porosity far beyond that of similar products, which means lower pressure loss across the cartridge and higher dirty holding capacity.

MBCY-cbt-02.png


· High purity. Using long fiber fusion and spray process, continuous fiber hot melt interweave into rich and stable pore structure. No adhesive or surfactant, no silicone oil, low precipitate;


· Extensive chemical compatibility. Fully polypropylene structure, complete series with reinforced center bar and optional external frame/end cover, the 68MBCY type .The cartridge can withstand the pressure difference of 4Bar and avoid short circuit of material caused by deformation of cartridge core when using.


· Wide range of optional filtration rate. It is available from 0.3 to 120μm, which meets various operating conditions.




Material of Construction

Filter MediumPolypropylene
Support LayerPolypropylene
Core/Cage/End CapsPolypropylene
O-RingPlease refer to ordering information
O.D.2.51" (64mm)
I .D.1.10" (28mm)



Operating Conditions

Max. Opering Temperature80°C
Max. Differential Pressure
4.0 bar / 21°C




Flow Rate Characteristics


MBCY-flowrating-cbt.png

Retention Characteristic

Pore sizeMBCY 0.3MBCY 0.5MBCY 1.0MBCY 3.0MBCY 5.0
 
≥0.5μm99.99%99.98%95.75%- -
 
≥1.0μm100%100%99.98%- -
 
≥2.0μm100%100%100%99.00% 97.30%
 
≥3.0μm100%100%100%99.80% 98.30%
 
≥5.0μm100%100%100%100% 99.90%
 
≥8.0μm100%100%100%100% 100%
 
≥10.0μm100%100%100%100% 100%
 





Ordering Information

Series

Removal Rating End CapCore Material
LenghtSeal Material Industry

MBCY

69MBCY

 

0030 

0050

0100

0300

0500

1000

1500

2000

4000

7000

9000


= 0.3μm

= 0.5μm

= 1.0μm

= 3.0μm

= 5.0μm

= 10.0μm

= 15.0μm

= 20.0μm

= 40.0μm

= 70.0μm

= 90.0μm



DOE = Double Open End

TC = 222/Flat Cap

TF = 222/Fin Cap

SF = 226/Fin Cap

SC = 226/Flat Cap

N= No Gasket

H= PE Gasket

P=Polypropylene05= 5"

10=10"

20=20"

30=30"

40=40"

S=Slilicone

E=EPDM

V=Viton

P=PFA

N=None

C=Chemical





DOWNLOAD

Contact Form