Disposable Vent Filter

Disposable vent filters or called gamma stable filters ,gamma compatible vent filters ,are consist of 0.2μm hydrophobic PTFE filter media,features bacteria retention for air venting and gas filtration.Inherently hydrophobic characteristic and high porosity makes the filters perfect resistance to particulates,bacteria and water while with high air/gas permit under very low differential pressure.Stepped hose barb connectors make them very flexible to connect with different size tubes.Very light weight can prevent tubes from bending.They can be either gamma irradiated or autoclavable,which are widely used in single use system and assembling,such like bioreactor,fermenter,cell flasks,carboys etc.

Features and Benefits

Exceptionally high flow rate with low pressure drop
Integrity tested to provide a high level of confidence
Can be sterilized by gamma irradiation or autoclaving

Applications

Venting bioreactors
Fermentation tanks
Culture vessels
Carboys
Filling machines
Autoclaves
Transfer vessels

	SFU-GM	Bricap^® 42	Bricap^® V5D	Bricap^® V5A
Filter Media	Hydrophobic PTFE on a PET support
Pore Size	0.2μm	0.2μm	0.2μm	0.2μm
Housing	Gamma stable PP	Gamma stable PP	Gamma stable PP	Gamma stable PP
Filtration Area	0.72cm² / 3.4cm² / 4.5cm²	13.8cm²	20cm²	20cm²
Overall Length	19.0mm / 22.5mm / 26.1mm	47.0mm	69.5mm	83.5mm
Diameter	18mm / 30mm / 35mm	56.0mm	64.0mm	73.0mm
Inlet/Outlet Connections	Inlet: Female luer-lok Outlet: Male luer slip	1/4"-3/8" Hose barb	22.6	22.6
Max. Operation Pressure	6.0bar(87psi)@20°C	2.4bar(35psi)@20°C	4.2bar(61psi)@20°C	2.4bar(35psi)@20°C
Typical Air Flow Rate (20°C)	13mm: 0.5L/min@0.2bar(3psi) 25mm: 2.1L/min@0.2bar(3psi) 33mm: 2.9L/min@0.2bar(3psi)	6.3L/min@0.2bar(3psi)	9.6L/min@0.2bar(3psi)	9.0L/min@0.2bar(3psi)
Bubble Point	≥ 1.1bar (60% IPA)	≥ 1.1bar (60% IPA)	≥ 1.1bar (60% IPA)	≥ 1.1bar (60% IPA)
Sterilization	Gamma irradiation 25kGy recommended	- Gamma irradiation 25kGy recommended 50kGy maximum - Gamma irradiation	- Gamma irradiation 25kGy recommended 50kGy maximum - Gamma irradiation	- Gamma irradiation 25kGy recommended 50kGy maximum - Gamma irradiation
Biological Safety	Meets USP Biological Reactivity Test, in vivo, for Class VI-121°C Plastics.

Ordering Information

Cat. No.	Material	Pore Size	Sterility
SFM13PT0022-GM	PTFE	0.2 μm	Gamma-irradiated
SFM25PT0022-GM			Gamma-irradiated
SFM33PT0022-GM			Gamma-irradiated
SS47DISC-GM-PTFE0020L			Gamma-irradiated
SS47DISC-PTFE0020L			Autoclavable
64DISC-GM-PTFE0020L			Gamma-irradiated
64DISC-PTFE0020L			Autoclavable
AV50-GM-PTFE0020L			Gamma-irradiated
AV50-PTFE0020L			Autoclavable

For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by sales@cobetterfilter.com or leave a message