Lab Testing Line

Optimized System for Ink Jet R&D Laboratory

	S-SIF I · Single cartridge housing applies Cobetter 126 filter cartridge. · Low hold-up volume for minimal fluid loss. · Inlet,outlet ,vent and drain ports are conveniently located on the housing system. · Electro-polished finish for easy clean-up. Internal Ra 0.3μm, External Ra 0.4μm. · Easy to clean, easy to drain.
Low Volume Production Line
	S-SIF II · Inverted Design · Easy to Clean · Easy to Drain Contaminants
	S-SIF III · Design for 100L/Hr Flow Rate.

Operating Conditions

Item	Description	Specification
Pump	Ingersoll-Rand, Aro Diaphragm Pump	Stainless Steel DN25
Housing	Cobetter H-SCF-1 Liquid Filter Housing	3 stages, 1-round, 5/10 " length
Tube	Fine Polishing Stainless Steel	1 " (DN25)
Connection	Tri-clamp	1 " (DN25)

* 3 Stages of Filtration; Housing material SS316L

* Surface Finish: Electro-polished, Internal 0.3μm / External 0.4μm

Stainless Steel Filter Holder H-DMF

Batch Testing Sanitary-grade, Pressure Filtration

Cobetter H-DMF Stainless Steel Disc Filter Holders have been designed for ink jet ink filtration. This kind of housing provides higher safety than PP membrane holder and glass membrane holder.

Material of Construction

Polishing Type	Mechanical Polished / Electro-polished
Surface Option	Internal 0.3μm / External 0.4μm

Ordering Information

Series	Number of Membrane	Cartridge Length	Material	Inlet/Outlet	Seal Material
H-DMF	1= Single Layer 2= Double Layer	47=47mm 60=60mm 90=90mm 142=142mm 150=150mm 200=200mm	A= 304 B= 316L	T= Tri-clamp	S=Slilicone E=EPDM V=Viton P=Encapsulated Viton

Mass Production Line

Design for 1500L/Hr flow rate

S-SIF IV S-SIF V

· 4 Stages of Filtration; Housing Material SS316L
· Surface Finish; Electro-polished; Internal 0.38μm/External 0.4μm
· Max flow rate for this system can reach 3000L/Hr.

Operating Conditions

Item	Description	Specification
Pump	Ingersoll-Rand, Aro Diaphragm Pump	Stainless Steel DN25
Housing	Cobetter H-TBF Top Inlet Bag Housing Cobetter H-SCF Liquid Filter Housing	1 stage: single bag 2 -4 stages: 9-Round /10" Lengt
Tube	Fine Polishing Stainless Steel	1.5 "
Connection	Tri-clamp	1.5 "

Filtration Before Filling

Removal of agglomerate again to ensure ink quality.

· 1 Step Filtration

· Cobetter H-SCF Filter Housing Series

For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by info.industry@cobetterfilter.com or leave a message.

Lab Testing Line

Optimized System for Ink Jet R&D Laboratory

Low Volume Production Line

Operating Conditions

Stainless Steel Filter Holder H-DMF

Ordering Information

Mass Production Line

Design for 1500L/Hr flow rate

Operating Conditions

Filtration Before Filling