Preparations
Single Use
Utility System
Sterile APIs
Lab/Microbial Limit Tests
Cobetter Instruments
OEM Membranes and Devices
Sintered Porous PTFE
Oxygenation
Air and Vent Filtration
Infusion Therapy
Medical Water Filtration
Surgical Smoke ULPA Filter
Semiconductors
Flat Panel Display
Electronic Chemicals
Data Storage
High Brightness Light Emitting Diode
Brewing
Bottled Water
Wine
Soft Drinks
Dairy
Distilled Spirits
Food and Ingredients
Energy and Chemical Industry
Fine Chemical Industry
Hydraulic & Lubricating System
Machinery & Equipment
Transfer Membrane
Sterility Testing
Groundwater Sampling Filter
Automobile Exhaust Detection Membrane
Car Cleanness Filter Detection Membrane
Atmosphere /Flue Gas Monitoring Membrane
Ultrafiltration Centrifugal Tube
Home | Industries | Pharmaceutical| SteriPS Filter Cartridges
SteriPS Filter Cartridges
Single-layer PES Membrane · Sterilizing Grade
SteriPS Filter Cartridges are specially designed to provide a reliable sterilizing solution at an economical cost. Hydrophilic PES membrane cartridges require no pre-wetting and are ready to use. In addition, these filters provide good performance in pharmaceutical applications.
Low diffusion flow
Inherently hydrophilic PES membrane
High surface area design provides high flow rates and extended service life while maintaining high bacteria removal efficiency
Lower protein binding
• Non-fiber Releasing : Component materials meet the criteria for a "Non-fiber-releasing filter" as defined in 21 CFR 210.3(b)(6).
• Component Material Toxicity :Meet the requirement of USP <87> In Vitro Cytotoxicity Test ; Meet the Criteria of USP<88> Biological Reactivity Test for Class VI-121℃ plastics
• TOC/Conductivity at 25 ℃:Autoclaved filter effluent meet the USP<643> for Total Organic Carbon and USP<645> for
• Water Conductivity per WFI requirements after a UPW flush of specified volume .
• Particle Shedding : Autoclaved filter effluent meet the USP<788>for large volume Injections .
• Indirect Food Additive:All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182 , and EU framework regulation [1935/2004/EC].
Antibiotics
LVP & SVP
Ophthalmic Solutions
Large Batch Solutions
Cleaning & Disinfecting Liquids
Materials of Construction
Filter Media | PES Membrane |
Support | Polypropylene |
Core/Cage/End Caps | Polypropylene |
Operating Conditions
Max. Operating Pressure | 6.9 bar (100 psi) at 25 °C 4.0 bar (58 psi) at 60 °C 2.4 bar (35 psi) at 80 °C |
Max. Differential Pressure | Forward 6.9 bar (100 psi) at 25 °C 4.0 bar (58 psi) at 60 °C 2.4 bar (35 psi) at 80 °C Reverse 3.0 bar (44 psi) at 25 °C 1.0 bar (15 psi) at 80 °C |
Effective Filtration Area | 0.58m² / Φ 69-10 inch |
Sterilization
Inline Steam Sterilization | up to 100 cycles (135°C for 30min< 0.3 bar per cycle) |
Autoclave | up to 200 cycles (130°C for 30min per cycle) |
Integrity Test Data
Bubble Point | ≥ 0.32 MPa (water), 0.22 μm |
Diffusion Flow | ≤ 25 ml/min/10”@ 0.275 Mpa, 0.22 μm |
Ordering Infomation
Removal Ratings | End Cap | Nominal Length | Seal Material | Industry | |
SPSHR | 0022=0.22μm 0045=0.45μm | HSF=226 /Fin (PBT Insert) HSC=226 /Flat (PBT Insert) HTF=222 /Fin (PBT Insert) HTC=222 /Flat (PBT Insert) DOE=Double Open End | 05= 5" 10=10" 20=20" 30=30" 40=40" | S=Silicone E=EPDM V=Viton P=PFA/Viton | P = Pharmaceutical |
Contact Form
Hangzhou Cobetter Filtration Equipment Co.,Ltd
Tel
86-571-87704359(English)
86-571-87704270(Japanese)
sale@cobetterfilter.com
Sales
19/F, Building B, Huanyu Business Center, No.626 Kejiguan Road Binjiang District, Hangzhou 310052, China
Factory
Heshang Industry Section,Xiaoshan,Hangzhou 310053,China
COPYRIGHT 2019 Cobetter Filtration Equipment Co.,Ltd ALL RIGHTS RESERVED.
Web design:Hangzhou dingyi information technology co.,Ltd