Preparations
Single Use
Utility System
Sterile APIs
Lab/Microbial Limit Tests
Cobetter Instruments
OEM Membranes and Devices
Sintered Porous PTFE
Oxygenation
Air and Vent Filtration
Infusion Therapy
Medical Water Filtration
Surgical Smoke ULPA Filter
Semiconductors
Flat Panel Display
Electronic Chemicals
Data Storage
High Brightness Light Emitting Diode
Brewing
Bottled Water
Wine
Soft Drinks
Dairy
Distilled Spirits
Food and Ingredients
Energy and Chemical Industry
Fine Chemical Industry
Hydraulic & Lubricating System
Machinery & Equipment
Transfer Membrane
Sterility Testing
Groundwater Sampling Filter
Automobile Exhaust Detection Membrane
Car Cleanness Filter Detection Membrane
Atmosphere /Flue Gas Monitoring Membrane
Ultrafiltration Centrifugal Tube
Home | Semiconductors | Photoresist| Photopex Multi
Photopex Multi
According to different application requirements, use Cobetter's know-how and experience to customize the product.
Dual-layer membrane structure, to provide higher filtration efficiency for more sophisticated semiconductor process.
Using high purity PE structure and apply the ultra-clean technology to ensure filter's cleanliness.
Photoresist Filtration
Solvent Filtration
Photochemical Filtration
Higher Efficiency
Naturally Hydrophilic
Better Initial Cleanliness
100% Integrity Tested
Cartridge | Capsule | |
Filter Membrane | Nylon 66 | |
Support | HDPE / PP | |
Cage/Core/End Caps | HDPE / PP | |
O-ring | TEV or EPDM | |
Shell (Capsule only) | HDPE / PP | |
Max. Operating Temperature | 50°C | 38°C |
Max. Operating Pressure | 0.28MPa @ 25°C | 0.34MPa @ 25°C |
Filter Areas | X1 (ø68mm) | X2 (ø68mm) |
0.9 m²/10" | 1.4 m²/10" |
Ordering Information
PPM | 1 | 2 | OTC | 3 | 4 | 5 | 6 |
Block 1 | Block 2 | Block 3 | Block 4 | Block 5 | Block 6 |
Diameter | Removal Ratings | Nominal Length | O-ring Material | Cleanliness | Package |
X1=ø68mm X2=ø68mm | NM02=2nm NM05=5nm NM10=10nm NM20=20nm NM40=40nm 0010=0.1μm 0020=0.2μm 0045=0.45μm 0065=0.65μm 0100=1.0μm 0300=3.0μm 0500=5.0μm | 04=4" 10=10" 20=20" | P=TEV E=EPDM | UU= Super clean grade UH= High clean grade U= Semicon grade E= Electronic grade | D=Dry W=Prewet, UPW |
PPN | 1 | 2 | 3 | OTC | 4 | 5 | 6 | 7 |
Block 1 | Block 2 | Block 3 | Block 4 | Block 5 | Block 6 | Block 7 |
Diameter | Diameter | Removal Ratings | Nominal Length | O-ring Material | Cleanliness | Package |
_ = HDPE P = PP
| Z1=ø83mm X1=ø68mm | NM02=2nm NM05=5nm NM10=10nm NM20=20nm NM40=40nm 0010=0.1μm 0020=0.2μm 0045=0.45μm 0065=0.65μm 0100=1.0μm 0300=3.0μm 0500=5.0μm | 04=4" 10=10" 20=20" | P=TEV E=EPDM | UU= Super clean grade UH= High clean grade U= Semicon grade E= Electronic grade | D=Dry W=Prewet, UPW |
F016 / F040 / 118 Serise
PPN | 1 | 2 | 3 | 4 | 5 | 6 |
PPF1 |
Block 1 | Block 2 | Block 3 | Block 4 | Block 6 | Block 6 |
Diameter | Removal Ratings | Length | O-ring Material | Cleanliness | Package |
S = ø60mm
| NM20=20nm NM50=50nm 0010=0.1μm 0020=0.2μm 0100=1.0μm | F016E=51.5±0.5mm F040E=112±1.0mm 118E=123.5±1.0mm | P=TEV E=EPDM | UU= Super clean grade UH= High clean grade U= Semicon grade E= Electronic grade | D=Dry W=Prewet, UPW |
Capsule
PPN | 1 | 2 | 3 | 4 | 5 |
Block 1 | Block 2 | Block 3 | Block 4 | Block 5 | |||
Membrane | Removal Ratings | Fitting Type | Inlet/Outlet | Vent/Drain | O-ring Material | Package | |
_ = HDPE P = PP | NM02=2nm NM05=5nm NM10=10nm NM20=20nm NM40=40nm 0010=0.1μm 0020=0.2μm 0045=0.45μm 0065=0.65μm 0100=1.0μm 0300=3.0μm 0500=5.0μm | HDPE SW44E=SW SW984E=SW PL54LE=CPL PL54ME=CPL NPT42E=NPT FL64E=CFL PP BFL64-4=CFL BFL64-10=CFL BFL64-20=CFL FL64=CFL PL64M=CPL PL64L=CPL PL54M=CPL PL54L=CPL NPT42=NPT NPT742=NPT NPT942=NPT SW43=SW SW743=SW SW943=SW SW44=SW SW744=SW SW944=SW SW84=SW SW784=SW SW984=SW SW764=SW CBT0M=CPL CBT0L=CPL CBT3M=CPL CBT3L=CPL CBT8M=CPL CBT8L=CPL | 1/4" 1/4" 1/2" 8mm 8mm 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 8mm 8mm 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" 3/8" 1/4" 1/4" 3/8" 3/8" 8mm 8mm | 4mm 1/4" 1/4" 4mm 4mm 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 4mm 4mm 4mm 4mm 1/8" 1/8" 1/8" 4mm 4mm 4mm 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 4mm 4mm | UU= Super clean grade UH= High clean grade U= Semicon grade E= Electronic grade | D=Dry W=Prewet, UPW | |
PPN | 1 | 2 | 3 | 4 |
Block 1 | Block 2 | Block 3 | Block 4 | |||
Removal Ratings | Fitting Type | Inlet/Outlet | Vent/Drain | O-ring Material | Package | |
NM02=2nm NM03=3nm NM05=5nm NM07=7nm NM10=10nm NM15=15nm NM20=20nm NM30=30nm 0010=0.1μm 0020=0.2μm | SW43E=SW SW44E=SW SW984E=SW PL54LE=CPL PL54ME=CPL NPT42E=NPT FL64E=CFL | 1/4" 1/4" 1/2" 8mm 8mm 1/4" 3/8" | 4mm 1/4" 1/4" 4mm 4mm 1/8" 1/4" | UU= Super clean grade UH= High clean grade U= Semicon grade E= Electronic grade | D=Dry W=Prewet, UPW | |
Contact Form
Hangzhou Cobetter Filtration Equipment Co.,Ltd
Tel
86-571-87704359(English)
86-571-87704270(Japanese)
sale@cobetterfilter.com
Sales
19/F, Building B, Huanyu Business Center, No.626 Kejiguan Road Binjiang District, Hangzhou 310052, China
Factory
Heshang Industry Section,Xiaoshan,Hangzhou 310053,China
COPYRIGHT 2019 Cobetter Filtration Equipment Co.,Ltd ALL RIGHTS RESERVED.
Web design:Hangzhou dingyi information technology co.,Ltd