Preparations
Single Use
Utility System
Sterile APIs
Lab/Microbial Limit Tests
Cobetter Instruments
OEM Membranes and Devices
Sintered Porous PTFE
Oxygenation
Air and Vent Filtration
Infusion Therapy
Medical Water Filtration
Surgical Smoke ULPA Filter
Semiconductors
Flat Panel Display
Electronic Chemicals
Data Storage
High Brightness Light Emitting Diode
Brewing
Bottled Water
Wine
Soft Drinks
Dairy
Distilled Spirits
Food and Ingredients
Energy and Chemical Industry
Fine Chemical Industry
Hydraulic & Lubricating System
Machinery & Equipment
Transfer Membrane
Sterility Testing
Groundwater Sampling Filter
Automobile Exhaust Detection Membrane
Car Cleanness Filter Detection Membrane
Atmosphere /Flue Gas Monitoring Membrane
Ultrafiltration Centrifugal Tube
Home | Ink Jet | Filtration for Ink Production| Duredunty Filter Cartridges
Duredunty Filter Cartridges
Double-Layer PES Membrane · Final Filtration
Cobetter Duredunty Filter Cartridges are made of a double-layer PES membrane and are designed as final filter for
dye-based ink jet inks filtration. The double-layer membrane
provides great filtration efficiency and can eliminate most
of the difficulties encountered by inadequate removal efficiency.
- Double-layer membrane provides great filtration efficiency and highest assurance of ink quality.
- Built in Asymmetric prefilter layer for longer life time and high gel removal.
- Recommended for ecosolvent ink gel removal.
- Hydrophilic membrane with low initial differential pressure.
- Each element is individually integrity tested to ensure filter quality. The filter's bubble point ≥5.0bar with 0.1+0.03 removal ratings.
- Provides broad chemical compatibility (pH1-14); great compatibility with dye-based ink chemistries.
Filter Medium | Double-Layer PES Membrane |
Support Layer | Polypropylene |
Core/Cage/End Caps | Polypropylene |
O-Rings | Please refer to ordering information |
Effective Filtration Area | 0.64 m² x 2 /10 inch |
Max. Operating Temperature | 80°C |
Max. Differential Pressure | 4.0 bar / 21°C 2.4 bar / 80°C |
2210 =0.22+0.1μm | 2222 =0.22+0.22μm | 4522 =0.45+0.22μm | 4545 =0.45+0.45μm | |
Bubble Point ( in wanter @23°C ) | ≥ 3.8 bar | ≥ 3.4 bar | ≥ 3.2 bar | ≥ 2.0 bar |
Removal Ratings | End Cap | Nominal Length | Seal Material | -C | ||
DPS | 1003=0.1+0.03μm | DOE=Double Open End | 05= 5" | S=Slilicone | ||
1010=0.+0.1μm | TC=222 O-ring/Flat | 10= 10" | E=EPDM | |||
2210=0.22+0.1μm | TF=222 O-ring/Fin | 20= 20" | V=Viton | |||
2222=0.22+0.22μm | SF=226 O-ring/Fin | 30= 30" | P=Encapsulated Viton | |||
4522=0.45+0.22μm | SC=226 O-ring/Flat | 40= 40" | ||||
4545=0.45+0.45μm | ||||||
6545=0.65+0.45μm |
Contact Form
Hangzhou Cobetter Filtration Equipment Co.,Ltd
Tel
86-571-87704359(English)
86-571-87704270(Japanese)
sale@cobetterfilter.com
Sales
19/F, Building B, Huanyu Business Center, No.626 Kejiguan Road Binjiang District, Hangzhou 310052, China
Factory
Heshang Industry Section,Xiaoshan,Hangzhou 310053,China
COPYRIGHT 2019 Cobetter Filtration Equipment Co.,Ltd ALL RIGHTS RESERVED.
Web design:Hangzhou dingyi information technology co.,Ltd