Cobetter high flow filter cartridge is designed for membrane process high flow desalination plants.The high flow filter is a large diameter, single open ended pleated filter cartridge. The filter diameter is 6"/152 mm, with large filtration area,and high flow rate up to 90m³/hr. It can be widely used in various industries, with less quantity,less downtime for change-out and significant cost saving.

High density pleated filter type resulting in a high filtration area, high flow rates, longer service life, and high dirt holding capacity.
Multi-layered design provides gradient filtration.
Reduce Condensation. Vapor-permeable perperty.
Internal PP core guarantees no distortion and resists higher reverse differential pressure.
Ergonornically designed handle facilities fast and easy Installation and remove without special tools.

Industrial
Municipal Water, Pre-RO Filtration, Reclaimed Water, Coolants, Nozzle Protection, Boiler Condensate
Petrochemicals
Water-flooding, Produced Water, Enhances Oil Recovery, Completion Fluids, Amine Sweetening, Finial Products
Chemical
Quench Water, Aqueous Salt Solutions, Final Products
Electronics
Pre-RO Filtration, Process Water
Food & Beverage
Process Water
Pharmaceutical
Process Water

High Flow 02.png

Operating Conditions

	PP	GF
Filter Media	Pleated Polypropylene depth structur	Rein bonded glass fiber / Polyester support
Support/Drainage	Polypropylene	Polyester
End Caps	Glass filled polypropylene
Core	Polypropylene
Outside Material	PP Cage (HFPP150 Series)	PET Net (HF150 Serise)
Max. Operating Temperature	80°C	121°C
Max. Differential Pressure	HFPP150 (PP Cage) HF150 (PET Net) 0.40 Mpa/21°C 0.38 MPa/21°C 0.15 MPa/80°C

Flow Rate Characteristics

Length	20"	40"	60"
Design Flow	15 m³/h	30 m³/h	45 m³/h
Max. Allowable Flow	30 m³/h	60 m³/h	90 m³/h
Filtration Area	2.8 m²	5.6 m²	8.4 m²

Retention Rate Characteristics

Particle Size	Filtration Efficiency HF150NB
	PP0.8μm	PP1.0μm	PP2.0μm	PP3.0μm	PP5.0μm	PP10μm	PP20μm
≥1μm	99.89%	99.82%	95.00%	86.97%	79.86%	42.23%	24.38%
≥2μm	99.97%	99.87%	98.64%	86.97%	90.09%	70.49%	40.09%
≥5μm	100.0%	99.93%	99.90%	98.86%	98.36%	82.26%	76.66%
≥8μm	100.0%	100.0%	99.97%	99.20%	98.88%	95.25%	82.60%
≥10μm	100.0%	100.0%	100.0%	99.58%	98.39%	98.18%	89.42%
≥12μm	100.0%	100.0%	100.0%	99.78%	99.57%	98.76%	97.41%
≥25μm	100.0%	100.0%	100.0%	100.0%	100.0%	99.34%	99.14%

Filter Performance Comparison I

High Flow 08.png

Filter Performance Comparison II

Element and Filter Housing Comparison

HF150-food-&-Beverage.png

Time and Labor for Changeout
	HFPP150 Flow System can reduce 90% of the filter elements when compared to the conventional Ø2.5” System. This system is 2 to 3 times smaller than depth or pleated filter systems. The reduction in necessary filter elements and smaller system size decreases production downtime and maintenance cost.

End Cap Configuration

High Flow 07.png

Ordering Information

Filter Media

Removal Ratings

Nominal Length

Seal Material

HFPP150

(PP Cage)
HF150NB

(PET Net)
HFM150
DSHF150
G1HF150
N1HF150
N2HF150
N3HF150
N4HF150
N5HF150
JL-150

0050=0.5μm

0080=0.8μm

0100=1.0μm

0200=2.0μm

0300=3.0μm

0500=5.0μm

1000=10.0μm

1500=15.0μm
2000=20.0μm
4000=40.0μm
7000=70.0μm
9000=90.0μm

10= 10"

20= 20"

30= 30"

40= 40"

S=Slilicone

E=EPDM

V=Viton

-C

For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by info.industry@cobetterfilter.com or leave a message.